NEW SERVICE:
For Architects, Engineers, Contractors and Developers
With ADSearch & Spec you can automatically create Specs and Schedules and coordinate all your construction documents using Parkland Plastics products!
|
PLAS-TEX® Silk
WHAT IS IT?
Silk is an extruded PLAS-TEX® sheet with a Smooth surface texture, similar to semi-gloss, painted surfaces.
 Features & Benefits
Applications
Installation
Maintenance
Availability
Download PDF Literature
| FEATURES |
BENEFITS |
| 100% Waterproof |
Non-absorbent: no swelling, rotting, or water discoloration |
| Fiberglass free |
No irritating, harmful fiberglass dust |
| Does not support mold, mildew, or bacteria growth |
Hygienic: does not contribute to "sick"-building syndrome |
| Chemically inert |
Not affected by acids, harsh chemical solvents or petroleum products |
| |
For interior use |
| Color goes all the way through |
Scratches don't show makes for extended product life |
| Smooth texture with semi-gloss finish |
Maintenance free alternative to painted walls |
| Class C flame spread rating |
Passes most interior building codes |
| Made from 100% recycled resins |
Contributes to Green Building: scrap can be recycled as grade #7 |
| USDA/CFIA approved |
Use in federally inspected food processing plants |
| Easy installation |
Can be scored with utility knife and snapped |
TYPICAL APPLICATIONS
Silk has an array of uses for both commercial and residential settings that have a lot of moisture or are washed down for cleanliness. Field applications include:
- Bathroom Walls
- Tub Kits for renovation of Hotel Rooms
- Tub Enclosure above Tub Kit
- Laundry Rooms
- Utility Rooms
- Commercial Restrooms
- Commercial Utility Rooms
- Commercial Kitchens
- Break Rooms
- Shelf Liners
- Not recommended for ceilings, RV's, or garages.
INSTALLATION INFORMATION
Install over an unfinished, smooth, sound wall with moisture-curing, non-flammable latex adhesive using a notched trowel. When installing over a non-porous surface, such as a painted wall or ceramic tile, our proprietary SS-95 adhesive is strongly recommended. Precondition panels and moldings for 24 hours at the final temperature in the room to be applied. Allow 72 hours for adhesive to cure.
Please refer to Installation Instructions
for detailed directions or see video. 
LOW MAINTENANCE
Maintenance is simple with a clean rag and any household cleaner. PLAS-TEX® is unaffected by most corrosive chemicals and solvents. Do not use abrasive cleansers.
PRODUCT RANGE
|
