|
|
 |
|
What is PLAS-TEX?
PLAS-TEX is a mineral reinforced Polyethylene
sheet made with 100% recycled plastic.
Product Uses
- Wall coverings for kitchens, food processing
plants, restrooms, convenience stores
and other areas where sanitation and ease
of cleaning are important considerations.
- Factories where chemical resistance
is an important consideration.
- Wainscoting and wall panels in areas
subject to abuse from pedestrian traffic,
carts or fork lifts.
- Wet or moist environments.
Features and Benefits
100% Waterproof
No water damage with frequent wash-down
No swelling, no rotting
Will not harbor bacteria
Exclusive Hygienic Properties
Clinically proven to resist bacterial
growth
Will not harbor E.coli, black mold or
staph
Chemically Resistant
Use cleaners of all types without damage
No yellowing or color change with corrosive
environments
Acid resistant
Reduce maintenance costs
Light Weight
Easy to install
Reduce roof load when used as ceiling
Made From Recycled Plastic
Buy recycled without cost penalty and
get superior product.
Available Colors and
Textures:
Bright white, Pewter white and Almond
Matte, NRP and Silk finishes
Custom Products
- Other colors, gauges and sizes are
available on special order.
- Moldings for joining and finishing
are available color matched for our
products.
- Pre-laminated panels on gypsum drywall,
fluted plastic or plywood.
Product Limitations
- Temperature variation or high ambient
temperature when the product is in use.
A 4' wide panel will move .018" (.45mm
) with each 10° F change in temperature.
- Class C flame spread and less than
450 smoke (ASTM E-84). This is adequate
for most environments.
- This product is not structural.
- These products are designed for interior
use only.
Key Variables to Consider in Selecting
the Right Product
- Appearance. The available textures
give a variety of looks, from a smooth
"painted" look to a heavily textured
"industrial" appearance.
- Expected abuse. Heavier textures hide
marring. Thicker sheets resist impact.
- Temperature range. If the temperature
variations will exceed 20° F, select
one of our pre-laminated products.
- Operating temperatures. Our panels
are not recommended for environments
when the ambient temperature exceeds
110° F.
|
|
 |
|
 |
 |
Parkland Plastics, Inc. Copyright © 2004-2008. All rights
reserved.
|
|